Deals 🛒 Silverline Tools Silverline Bike Bicycle Cycle Wheel Spoke Key Adjuster Spanner 535535 ❤️

Silverline Bicycle Bike Wheel Spoke Key Adjuster Spanner

MPN: 535535

Barcode: 5024763066931

Easy to use carbon steel spoke adjusting tool.

Hardened and tempered chrome plated spoke key adjuster spanner

For spoke gauges 10 to 15.

Spoke Sizes:

• 10 gauge
• 11 gauge
• 12 gauge
• 13 gauge
• 14 gauge
• 15 gauge

How to use and why

A bicycle spoke wrench or spoke key used to adjust wheel spokes in order to true a wheel I.E. put it back into alignment

With your bike upside down, grab a pair of spokes on either side of the
wheel and squeeze them together and continue this all the way around one side of the wheel this will help you
determine which spokes are loose, which are to tight, next do the same to the spokes on the other side of
the wheel. make sure to check every last spoke to determine which
of them are out of balance. the spokes on the drive side of a rear wheel
may have higher tension than those on the other side by design so focus on whether
the spokes are balanced and make a note of overly loose or tight spokes by marking them as you goe tighten but do not overtighten the spokes with the spanner a little at a time.

If the wheel is out of alighment use your thumb up against the wheel edge using the frame to steady your hand in one position, Most often, the rim will be out of true where the loose spoke is located
and will wobble toward the frame in the opposite side of where that
spoke is anchored into the hub. In most cases, tightening the spokes that attach to the hub on the side opposite the wheel’s wobble this will fix this problem a little at a time is best

Tip Do not rush this job or you will find that you will make the wheel worse than before. overly bent spokes will need replacing the correct tensions will never be retained on a bent spoke.

Silverline Tools Guarantee

Hand tools are guaranteed forever other tools are guaranteed for 3 years unless stated. This simply means all hand tools
are guaranteed to be free of defects caused by faulty materials or
workmanship from now until the end of time. Naturally, fair wear and
tear is not covered so do not expect blades to stay sharp forever.

To Register your product. Click here Silverline Tools Guarantee this must be done to extend your Silverline Guarantee.